HomeProjects

Projects

Department of Medical Informatics and Artificial Intelligence

TeleBrain – Artifically Intelligent EEG Analysis in the Cloud
WPN3/9/TeleBrain/2018
Delivery time: 01.09.2019 – 31.08.2022
Project manager: prof. dr hab. inż. Andrzej W. Mitas
Financing: National Center for Research and Development as part of Poland-Germany cooperation in the area of “DIGITIZATION of ECONOMY”
Partners: Technische Universität Ilmenau (Germany), APA Sp. z o.o. (Gliwice, Poland), eemagine Medical Imaging Solutions GmbH (Berlin, Germany)

Interactive spine and posture rehabilitation system in terms of dynamic, personalized D4S stimulation
POIR.04.01.02-00-0082/17
Delivery time: 01.07.2018 – 30.06.2021 r.
Project manager: prof. dr hab. inż. Andrzej W. Mitas
Financing: Project co-financed by the European Union under the Intelligent Development Operational Program 2014-2020 and the National Center for Research and Development
Partners: Meden-Inmed Sp. z o.o.

Hybrid system of multi-modal signal acquisition and processing in the analysis of sigmatism in children
2018/30/E/ST7/00525
Delivery time: 2019 – 2022
Project manager: dr hab. inż. Paweł Badura, prof. PŚ
Financing: National Science Center, Sonata Bis 8

SMART – Activity monitoring and training rationalization system
SCP05/12532/21228
Delivery time: 01.04.2020 – 31.03.2022
Project manager: prof. dr hab. inż. Andrzej W. Mitas
Financing: Silesian Centre for Entrepreneurship (ŚCP), European Union under the Regional Operational Program of the Śląskie Voivodeship for 2014-2020
Partners: Institute of Physiotheraphy and Health Science, Academy of Physical Education in Katowice, Comfortel sp. z o.o.

Multimodal Pain Monitoring Platform for Physiotherapy
WPN3/2/PainMonit/2018
Delivery time: 01.01.2019-31.12.2021
Project manager: prof. dr hab. inż. Ewa Piętka
Financing: National Center for Research and Development as part of Poland-Germany cooperation in the area of “Digitization of Economy”
Partners: Universität zu Lübeck (Niemcy), APA sp. z o.o.

2014

Development of a system for planning and supporting minimally invasive surgical procedures, localization, diagnostics and destruction of primary and metastatic neoplastic tumors in the liver
LIDER/03/47/L-1/NCBiR/2010
Delivery time: 01.04.2010 – 31.03.2014 r.
Project manager: dr inż. Dominik Spinczyk
Financing: National Center for Research and Development LIDER


2015

Development of innovative IT and design solutions in the field of medical telecare
POIG.01.03.01-24-061/12Delivery time: 01.06.2013 – 30.06.2015 r.
Project manager: prof. dr hab. inż. Ewa Piętka
Financing: National Center for Research and Development under the Innovative Economy Operational Program, 2007-2013

Multimodal road traffic monitoring system – OnDynamic
K2/HI2/23/182815/NCBR/13
Delivery time: 01.06.2013 – 31.05.2015 r.
Project manager: prof. dr hab. inż. Andrzej W. Mitas
Financing: National Center for Research and Development as part of the “INNOTECH” program in the HI-TECH program path


2016

Intraoperative tumor localization support system in minimally invasive surgery of the abdominal cavity
2012/05/B/ST7/02136
Delivery time: 26.02.2013 – 25.07.2016 r.
Project manager: prof. dr hab. inż. Ewa Piętka
Financing: National Science Center, Opus 3


2019

New molecular diagnostics and imaging tools in individualized therapy for breast, thyroid and prostate cancer
STRATEGMED2/267398/4/NCBR/2015

Delivery time: 01.10.2015 – 30.03.2019 r.
Project manager: prof. dr hab n. med. Rafał Tarnawski
Financing: National Center for Research and Development as part of the strategic research and development program “Prevention and treatment of civilization diseases” STRATEGMED
Partners: Oncology Center – Institute of Maria Skłodowska-Curie – Branch in Gliwice, WASKO S.A., Polish Society of Endocrinology, Polish Society of Pathologists, Medical University of Łódź, Medical University of Warsaw, ENTE Sp. z o.o., NOVUM S.A.


2020

Multimodal system for the visualization and monitoring of chronic wounds of the skin
UMO-2016/21/B/ST7/02236
Delivery time: 13.02.2017 – 13.08.2020 r.
Project manager: prof. dr hab. inż. Ewa Piętka
Financing: National Science Center, Opus 11

Department of Biomechatronics

SMART – a system for monitoring activity and rationalization of training
SCP05/12532/21228
Realization time: 01.04.2020 – 31.03.2022
Project leader: Andrzej W. Mitas, BEng, PhD, DSc
Financing: Śląskie Centrum Przedsiębiorczości (ŚCP), Regional Operational Programs of the Śląskie Voivodeship for 2014-2020 (European Regional Development Fund)
Partners: Institute of Physiotherapy and Health Sciences Akademia Wychowania Fizycznego im. J. Kukuczka in Katowice, Comfortel sp. z o.o.

Mobile mechatronic device with upright function for the disabled
07/030/NB_19/2043
Realization time: 01.10.2019 – 31.07.2021
Project leader: Zbigniew Paszenda, BEng, PhD, DSc
Partners: Technomex

Interactive spine and posture rehabilitation system in terms of dynamic, personalized D4S stimulation
07/010/FSB18/0026
Realization time: 01.07.2018 – 30.06.2021 r.
Project leader: Andrzej W. Mitas, BEng, PhD, DSc
Financing: Project co-financed by the European Union under the Intelligent Development Operational Program 2014-2020 and the National Center for Research and Development
Partners: Meden-Inmed Sp. z o.o.

2013

Methods of supporting the diagnosis of the musculoskeletal system in people with neurological diseases
0834/B/T02/2010/38
Realization time: 01.09.2012 – 11.04.2013
Project leader: Jacek Jurkojć, BEng, PhD, DSc
Financing: National Science Center

Biomechanical studies of the pathomechanism of the spondylolisthesis in the lumbar region of the human spine
4122/B/T02/2010/38
Realization time: 01.09.2012 – 16.05.2013
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Financing:  National Science Center

Designs of a stroller for the elderly to facilitate movement with the features of a rehabilitation walking frame
NB/65/RIB3/2013/501
Realization time: 15.03.2013 – 31.05.2013
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Ordering Party: WASIAK Beteiligungs GmbH Sp. Z O.O.


2014

Analysis of gait parameters in children with cerebral palsy after rehabilitation and treated with botulinum toxin
2011/01/B/NZ7/02695
Realization time: 01.09.2012 – 19.12.2014
Project leader: Robert Michnik, BEng, PhD, DSc
Financing: National Science Center

Model studies of the influence of chest defects on the biomechanics of breathing
2361/B/T02/2010/39
Realization time: 01.09.2012 – 26.04.2014
Project leader: Bożena Gzik-Zroska, BEng, PhD
Financing: National Science Center

Supporting technical and condition training of volleyball players with the use of model and experimental tests
0439/B/T02/2011/40
Realization time: 01.09.2012 – 01.06.2014
Project leader: Robert Michnik, BEng, PhD, DSc
Financing: National Science Center

Supporting the process of diagnostics and rehabilitation of people with mobility deficiency of the upper limbs
6801/B/T02/2011/40
Realization time: 01.09.2012 – 10.06.2014
Project leader: Agata Guzik-Kopyto, BEng, PhD
Financing: National Science Center

Assessment of the impact of interspine stabilization on changes in biomechanical features of the lumbar spine and clinical symptoms
2848/B/T02/2011/40
Realization time: 01.09.2012 – 26.05.2014
Project leader: Adam Rudnik, PhD, DSc
Financing: National Science Center

Research stand for interactive rehabilitation of children under three years of age with musculoskeletal disorders
0635/B/T02/2011/40
Realization time: 01.06.2013 – 15.03.2014
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Financing: National Science Center


2015

Development of a detailed technology for creating fillings for skull defects after craniectomy, forms for creating fillings for skull defects, engineering design of surgical procedures and protective helmets after craniectomy surgery
07/030/NB_18/2015
Realization time: 24.07.2015 – 15.09.2015
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Ordering Party: Innomed Sp. z o.o.


2018

Assessment of mechanical properties of the material used in the production of the tracheobronchial tube
07/030/NB_18/2015
Realization time: 15.01.2018 – 30.06.2018
Project leader Kamil Joszko, BEng, PhD
Ordering Party: Demed Sp. z o.o. Department of Medical Details

Development and comprehensive evaluation of biodegradable and flexible balloon-expanded endovascular stent based on thin spans of high strength
STRATEGMED2/269760/1/NCBR/2015
Realization time: 01.09.2015 – 31.08.2018
Project leader Marek Gzik, BEng, PhD, DSc, ProfTit
Financing: National Center for Research and Development
Partners: American Heart of Poland S.A., Center of Polymer and Carbon Materials of the Polish Academy of Sciences, Silesian Center for Heart Diseases

Improving the security and protection of soldiers on missions by operating in the military-medical and technical areas
DOBR-BIO4/022/13149/2013
Realization time: 20.12.2013 – 19.12.2018
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Financing: National Center for Research and Development
Partners: Military University of Technology, Military Medical Institute, Military Institute of Armored and Automotive Technology, AMZ Kutno


2019

Design and implementation of a prototype trainer for cardiology
NB-236/RIB3/2019
Realization time: 11.07.2019 – 30.09.2019
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Ordering Party: Balton Sp. z o.o.

Preparation of technological assumptions for the surface treatment of ceramic products
NB-181/RIB3/2019
Realization time: 24.04.2019 – 15.09.2019
Project leader: Marek Gzik, BEng, PhD, DSc, ProfTit
Ordering Party: APA Sp. z o.o.

Performing the first test stage of measurements with the use of pressure inserts placed in ski boots in the conditions of a downhill ski run
07/030/NB_19/2027
Realization time: 1.04.2019 – 05.04.2019
Project leader Robert Michnik, BEng, PhD, DSc
Ordering Party: MedicalBay Sp. z o.o.

Assessment of mechanical properties of tracheostomy tubes
07/030/NB_19/2028
Realization time: 15.03.2019 – 30.03.2019
Project leader Kamil Joszko, BEng, PhD
Ordering Party: Demed Sp. z o.o. Department of Medical Details


2020

Research on natural cured meat casings from animal intestines
07/030/NB_18/2026
Realization time: 13.09.2018 – 31.08.2020
Project leader Alicja Balin, BEng, PhD, DSc
Ordering Party: Jelux Polska

Department of Biomaterials and Medical Devices Engineering

Functionalization of polymers for biomedical applications with compounds with therapeutic effect
07/020/PBU19/0056
DUB20-II edition – Grant to start scientific activity in a new research topic, as part of the Excellence Initiative – Research University program
Delivery time: 27.11.2020-17.05.2022
Project manager: dr inż. Magdalena Antonowicz


Investigation of the influence of surface modification of metal biomaterials on bacterial adhesion
07/020/SDU/10-22-02
DUB20-II edition – Grant to start scientific activity in a new research topic, as part of the Excellence Initiative – Research University program
Delivery time: 27.11.2020-17.05.2022
Project manager: mgr inż. Anna Taratuta


Nanometric surface functionalization of metallic biomaterials used in the skeletal system 
07/020/PBU19/0044 OPUS
UMO-2018/29/B/ST8/02314
Delivery time: 28. 01. 2019-27. 01. 2022
Project manager: dr inż. Marcin Basiaga
Financing: National Science Center


Limiting peri-implant reactions around implants to treat anterior chest wall deformities through the use of hybrid surface treatment
07/020/SDU/10-21-01
DUB20-II edition – Grant to start scientific activity in a new research topic, as part of the Excellence Initiative – Research University program
Delivery time: 10. 06. 2020-10. 06. 2022
Project manager: dr inż. Anita Kajzer

2017


Shaping properties of biomaterials for tissue reconstruction
07/020/BK_17/0022 (BK-201/RIB2/2017)
Delivery time: 01. 2017-31. 12. 2017
Project manager: prof. dr hab. Eng. Jan Marciniak
Financing: Ministry of Science and Higher Education


Research on ceramic-polymer composites used in 3D printing systems
07/020/BKM17/0025 (BKM-512/RIB2/2017)
Delivery time: 05. 2017- 31. 12. 2017
Project manager: dr Eng. Damian Nakonieczny
Financing: Ministry of Science and Higher Education


Anodic oxidation by PEO of Zr, Ti, and Zr-Mg coatings deposited on grade 2 titanium in Joanneum
07/020/NB_17/0026 (NB-201/RIB-2/2017)
Delivery time: 07. 2017- 30. 08. 2017
Project manager: dr hab. Eng. Janusz Szewczenko, prof. PŚ


Polishing titanium samples for biocompatibility tests
07/020/U__17/0024 (U-684/RIB-2/2017)
Delivery time: 03. 2017- 29. 03. 2017
Project manager: dr Eng. Marcin Basiaga


Performing a test to evaluate the durability of the connection of the cannula with the connector of the POLVAD-MEV pneumatic extracorporeal heart pump
07/020/U__17/0027 (U-787/RIB-2/2017)
Delivery time: 11. 2017-30. 11. 2017
Project manager: dr Eng. Marcin Basiaga


2018


Shaping properties of biomaterials for tissue reconstruction
07/020/BK_18/0028 (BK-210/RIB2/2018)
Delivery time: 01. 01. 2018 -31. 12. 2018
Project manager: prof. dr hab. inż. Zbigniew Paszenda
Financing: Ministry of Science and Higher Education


Functionalization of aluminosilicates used as a filler in polymer-ceramic composites
07/020/BKM18/0041 (BKM-540/RIB2/2018)
Delivery time: 01. 01. 2018- 31. 12. 2018
Project manager: dr inż. Damian Nakonieczny
Financing: Ministry of Science and Higher Education


Assessment of the quality of slide shafts used for rolling bearings
07/020/U__18/0029 (U-639/RIB-2/2018)
Delivery time: 01. 02. 2018- 28. 02. 2018
Project manager: dr inż. Marcin Basiaga


Opinion on the innovation of the laboratory of advanced CAD / CAM systems and the treatment station for the needs of innovative prosthetics and dental implantology at the Stencel Implantology and Dentistry Center
07/020/U__18/0030 (U-655/RIB-2/2018)
Delivery time: 27. 02. 2018- 06. 03. 2018
Project manager: dr inż. Damian Nakonieczny


Opinion on innovation required for the purchase of equipment planned by the company: laser, microscope and scanner, as an attachment to the company’s application for funding in the competition No. RPWM. 01.03.02-IP.03-28-001 / 18
07/020/U__18/0031 (U-667/RIB2/2018)
Delivery time: 27. 03. 2018- 06. 04. 2018
Project manager: dr inż. Anna Ziębowicz


Preparation of a post-implementation opinion on innovation needed to settle the funding obtained under the Competition for Measure 3.2 Innovation in SMEs ROP voivodeship Silesian
07/020/U__18/0032 (U-684/RIB2/2018)
Delivery time: 17. 05. 2018- 30. 05. 2018
Project manager: dr inż. Anna Ziębowicz


Preparation of an implementation opinion to the application for co-financing the implementation of the project under the Regional Operational Program of the Śląskie Voivodeship for 2014-2020 (European Regional Development Fund)
07/020/U__18/0033 (U-704/RIB-2/2018)
Delivery time: 02. 07. 2018- 12. 07. 2018
Project manager: dr inż. Anna Ziębowicz


Implementation of an implementation review for the Emerald intraoral scanner by Planmeca. The opinion is required to submit applications for the innovation of a medical device in order to obtain funding from the European Union
07/020/U__18/0035 (U-710/RIB-2/2018)
Delivery time: 26. 07. 2018- 10. 08. 2018
Project manager: dr inż. Anna Ziębowicz


Quality assessment tests for surgical tweezers
07/020/U__18/0037 (U-722/RIB2/2018)
Delivery time: 05. 09. 2018- 21. 09. 2018
Project manager: dr hab. inż. Witold Walke, prof. PŚ


Quality assessment tests for surgical tweezers
07/020/U__18/0038 (U-728/RIB2/2018)
Delivery time: 19. 09. 2018- 18. 10. 2018
Project manager: dr hab. inż. Witold Walke, prof. PŚ


Performing a quality test of surgical instruments, including chisels and surgical hooks
07/020/U__18/0040 (U-734/RIB2/2018)
Delivery time: 27. 09. 2018- 05. 10. 2018
Project manager: dr inż. Marcin Basiaga


2019


Development of a design, executive documentation and execution of a working prototype of a device for assessing the degree of wear of surgical drills
07/020/NB_18/0036 (NB-267/RIB2/2018)
Delivery time: 09. 07. 2018 -31. 10. 2019
Project manager: dr inż. Marcin Basiaga


Shaping properties of biomaterials for tissue reconstruction
07/020/BK_19/0050 (BK-242/RIB2/2019)
Delivery time: 01. 01. 2019-31. 12. 2019
Project manager: prof. dr hab. inż. Zbigniew Paszenda
Financing: Ministry of Science and Higher Education


Modification of the surface of oxide ceramics, including zircon, used as a filler for polymer-ceramic composites
07/020/BKM19/0054 (BKM-536/RIB-2/2019)
Delivery time: 01. 01. 2019-31. 12. 2019
Project manager: dr inż. Damian Nakonieczny
Financing: Ministry of Science and Higher Education


Tests for self-twisting of locking screws from the plate – 16 pcs.
07/020/NB_19/0053 (NB-218/RIB2/2019)
Delivery time: 18. 07. 2019-01. 08. 2019
Project manager: dr inż. Marcin Basiaga


Execution of an implementation opinion on innovation regarding medical equipment, i.e. a dental microscope and a surgical scaler that the company plans to purchase
07/020/U__19/0043 (U-705/RIB2/2019)
Delivery time: 10. 01. 2019 -25. 01. 2019 r
Project manager: dr inż. Anna Ziębowicz


Assessment of the durability of the prosthesis bonding in the outflow cannula of the POLVAD-MED extracorporeal heart assist pump
07/020/U__19/0046 (U-725/RIB2/2019)
Delivery time: 29. 03. 2019 -12. 04. 2019 r
Project manager: dr inż. Marcin Basiaga


Implementation of an implementation review for the Emerald intraoral scanner by Planmeca. The opinion is required to submit applications for the innovation of a medical device in order to obtain funding from the European Union
07/020/U__19/0047 (U-739/RIB2/2019)
Delivery time: 10. 04. 2019-18. 04. 2019
Project manager: dr inż. Anna Ziębowicz


Preparation of an opinion on the innovation of the process in the subject of digitized implant prosthetic service
07/020/U__19/0048 (U-741/RIB2/2019)
Delivery time: 17. 04. 2019-26. 04. 2019
Project manager: dr inż. Anna Ziębowicz


Opinion on innovation – digitization of the implantological and prosthetic services
07/020/U__19/0049 (U-748/RIB2/2019)
Delivery time: 25. 04. 2019-30. 04. 2019
Project manager: dr inż. Anna Ziębowicz


Quality assessment tests for bone screws, 3.5 diameter, made of Ti6AI4V
07/020/U__19/0051 (U-765/RIB2/2019)
Delivery time: 29. 05. 2019- 12. 06. 2019
Project manager: dr inż. Marcin Basiaga


Opinion on innovation for the project called Implementation of an innovative process of processing prosthetic materials using a simultaneous 5-axis milling machine with a linear magnetic drive and laser control of modeling parameters
07/020/U__19/0052 (U-770/RIB2/2019)
Delivery time: 06. 06. 2019-21. 06. 2019
Project manager: dr inż. Anna Ziębowicz


2020


Shaping properties of biomaterials for tissue reconstruction
07/020/BK_20/0059 (BK-251/RIB2/2020)
Delivery time: 01. 01. 2020-31. 12. 2020
Project manager: prof. dr hab. inż. Zbigniew Paszenda


Selected physicochemical properties of the DLC coating applied to the Ti-13Nb-13Zr substrate intended for contact with blood
07/020/BKM20/0060 (BKM-513/RIB2/2020)
Delivery time: 01. 01. 2020-31. 12. 2020
Project manager: dr inż. Magdalena Antonowicz
Financing: Ministry of Science and Higher Education


Shaping the properties of the surface layer of skeletal dentures made with incremental technology
07/020/BKM20/0061 (BKM-514/RIB2/2022)
Delivery time: 01. 01. 2020-31. 12. 2020
Project manager: mgr inż. Agata Sambok-Kiełbowicz
Opiekun: dr hab. inż. Witold Walke, prof. PŚ
Financing: Ministry of Science and Higher Education


New strategies for surface modification of metal implants for medical applications
07/030/PBU16/2008 (PBU/20/RIB3/2016/505), CONSORTIUM (partner) OPUS
UMO-2015/19/B/ST5/03431
Delivery time: 23. 09. 2016- 22. 04. 2020
Project manager: dr hab. inż. Janusz Szewczenko, prof. PŚ
Financing: National Science Center


MINIATURE Development of physical and chemical properties of CoCrMo alloy for applications in the human urinary system
07/020/PBU19/0045
DEC-2018/02/X/ST8/03061
Delivery time: 01. 04. 2019- 31. 03. 2020
Project manager: dr inż. Wojciech Kajzer
Financing: National Science Center


Application of DLC coatings with increased abrasion resistance by the PVD method on elements of spine stabilizers made of Ti6AI4V alloy
07/020/NB_19/0058 (NB-387/RIB2/2019)
Delivery time: 01. 12. 2019 -31. 05. 2020 r
Project manager: dr hab. inż. Witold Walke, prof. PŚ


Opinion on the innovation of an integrated set consisting of an intraoral scanner (digital 3D impression), a milling machine and a laptop with the necessary software
07/020/U__19/0057 (U-869/RIB2/2019)
Delivery time: 17. 12. 2019-10. 01. 2020
Project manager: dr inż. Anna Ziębowicz


2021


MINIATURE Shaping the physicochemical properties of polymer-ceramic composites with oxide fillers
07/020/PBU19/0056
DEC-2019/03/X/ST5/00042
Delivery time: 09. 10. 2019- 08. 02. 2021
Project manager: dr inż. Damian Nakonieczny
Financing: National Science Center

Department of Biosensors and Biomedical Signals Processing

Development and manufacture of a 16-channel ECG device equipped with a module for rheocardiographic measurements, in particular the estimation of stroke volume (SV) and cardiac minute volume (CO), using new metrological methodologies
RPMP.01.02.01-12-0119/19
Implementation time: 01.04.2020 – 30.11.2022
Funding: Project co-financed by the European Union within the framework of the Regional Operational Programme for the Małopolska Voivodeship 2014-2020 (European Regional Development Fund)
Partners: String Polska Sp. z o.o.

Medicine Prescriptive System -Intelligent home sensor system for personalised prescriptive health care
WND-RPSL.01.02.00-24-0462/19-002
Implementation time: 01.07.2020 – 30.06.2022 r.
Financing: Project co-financed by the European Union under the Regional Operational Programme of the Silesian Voivodeship 2014-2020.
Partners: Iconity Sp. z o.o.

Intelligent clothing supporting injury prevention in sport
POIR.01.01.01-00-0653/19
Implementation time: 1.10.2020 – 29.04.2022
Funding: Project co-funded by the European Union under the Inteligent Development Operational Programme 2014-2020 and the National Centre for Research and Development
Partners: Higgsone Sp. z o.o.

Development of a new research methodology for the diagnosis and treatment of bruxism
2012/07/B/ST6/01238
Implementation time: 13.06.2013 – 13.06.2016 r.
Project Manager: Prof. Ewaryst Tkacz, D.Sc.
Funding: National Science Centre, OPUS 4
Partner: Institute of Theoretical and Applied Informatics, Polish Academy of Sciences

Śląskie Centrum Inżynierskiego Wspomagania Medycyny i Sportu ”Assist Med. Sport Silesia”

Media Społecznościowe
Kontakt

Europejskie Centrum
Innowacyjnych Technologii dla Zdrowia

© 2024 EHTIC. Wszystkie prawa zastrzeżone